CP 10035
Remote controller
COOL WHITE COLOR.
NIGHT LIGHT: Press this button to directly change to Night lamp mood (WARM WHITE COLOR, MIN.
BRIGHTNESS).
2. Fan setting:
ON/OFF: Press this button to switch on/off the fan function.
Speed: press this button to swtich the fan speed from LOW – MID – HIGH.
OSC: Press this button to start/stop 360º oscillation.
TIMER: Press this button to set timer off function with 1h to 4h.
Press once, 1 beep is Heard after 3 seconds, 1 hour timer is set.
Press twice, 2 beeps are Heard after 3 seconds, 2 hours timer is set.
Press 3 times, 3 beeps are Heard after 3 seconds, 3 hours timer is set.
Press 4 times, 4 beeps are Heard after 3 seconds, 4 hours timer is set.
Note: to cancel timer function, press
3. Memory setting.
This product can set the memory fucntion for more convenience application.
Memory setting: Switch the fan and LED light with your favorite situation. Press this button and hold for
5 seconds until 2 beeps are Heard, the memory operation mode is set successfully. To switch your set
memory mode from any other operation mode, press this button shortly to achieve.
Note: Remote control operation function is different as wall switch control. Install
2 pieces of LR03 1,5V AAA batteries (not included).
1. LED light setting:
ON/OFF: press this button to switch on/off the LED light function.
LED +: Press this button to increase the brightness of the unit until to full
setting.
LED -: Press this button to reduce the brightness of the unit until to lowest
setting.
LED FULL: Press this button to switch the LED lamp to be full brightness
setting.
Dimming to warm light: Press this button to increase the color temperature till
WARM WHITE COLOR.
Dimming to cool light: press this button to increase the color temperature till
(ON/OFF button).
14