TREVIDEA Girmi BL03 Manual Del Usuario página 10

- If the kettle operates when it's empty, the safety device
shuts down automatically to prevent any damage. It
won't be possible to operate until the complete cooling
of the resistance.
- After having boiled the water, remove the plug and drain
completely to avoid the scaling of the electric resistance.
Once finished, unplug the unit and wait for the complete
cooling of each part before storing or cleaning.
- Do not immerse the appliance in water or other liquids.
In any case, avoid splashing of water or other liquids.
Put the kettle on stable shelves and floors.
DESCRIPTION BL03
1 Nozzle
5 Silicone Container
MOUNTING
This kettle is equipped with a silicone container (5) that can be
folded to reduce the dimension and store it well.
To open the kettle and use it, take the upper housing with an
hand (6), the handle below the base with the other hand, and
pull opening completely (Fig. 1).
To fold the kettle after use Press the upper part and the base,
collapsing the container.
To open the handle (4), take it out of the lid and rotate until you
ear a click. To close the handle press the lock button (3, Fig. 2).
MAIN FUNCTIONS
Before using, operate the kettle 2 or 3 times and boil
the maximum amount of water (600cc) by replacing
each time hot water with cold water.
OPERATING THE KETTLE
- Pour in the kettle the desired amount of water,
never exceeding the limits indicated (MAX: 0.6 L, MIN: 0.2 L). Close the lid until it locks in position.
- Insert the power cable into the socket on the back of unit (6) and plug it into the main electrical outlet (AC
230V ~ 50Hz) to start the appliance.
- Operate the kettle by pressing the power ON button (7).
- When the liquid is boiling, the thermostat automatically turns off the unit. Use hot water as you wish,
making sure to completely empty the kettle to prevent limescale on the internal electric resistance.
CLEANING -
Unplug the unit and wait until the complete cooling down of each part before
starting cleaning operations.
- Do not immerse the kettle in water. In any case, prevent splashes of water or other liquids from reaching it.
- To clean the inside of the kettle, let it cool down and rinse with warm water to remove residues and
impurities. In any case, it will be necessary to periodically descaling the unit.
- Clean the base and the kettle with a damp cloth.
2 Lid 3 Handle lock button
6 Kettle body 7 Power on button
4 Handle
10