Hisense FT3B213 Serie Manual De Operación página 31

First use and installation
16
17
F
1
Cut the right length of the rubber strip F
and attach it to the side of the refrigerator.
To ensure the doors are fully closed/
sealed, conduct a test on both doors
following the installation of cabinet door,
such as using a sheet of paper
in-between the unit door and its seal
and closing the cabinet door and seeing
if there is any tension observed when
pulling the sheet of paper–the sheet
should hold in place and not fall out.
18
D
2
H
1
Install four decorative strips refer to the
instruction figure.
G
1
29