T-Mech MINI GARDEN TILLER Manual De Instrucciones página 7

23600 - T-MECH MINI GARDEN TILLER
SAFETY ADVICE
SAFE WORKING PRACTICE
Unscrew the fuel cap, and fuel the machine to 80% capacity. Fasten the fuel cap tightly avoiding
any cross threading and wipe up any spillages. Make sure the tiller is in a horizontal position
when fuelling.
If the tiller is not going to be used for long periods, drain the mixture from the fuel tank, start the
engine and drain the carburettor of any remaining fuel.
Please take care on slippery/wet ground.
If the tines become locked, please stop the engine. Clean off the debris and start again.
Use only outdoors. The Mini Tiller needs ventilation – the emissions contain carbon monoxide.
Do not overwork the machine.
Maintain proper control of the machine at all times, distractions may cause damage to the
machine and/or injury to the user.
Do not transport the machine when it is on.
Never touch the tines when the engine is running, or when accelerating.
Engine should be turned off, cool, and spark plug wire must be removed from spark plug before
any repairs are attempted.
Do not pour water on the electrical housing or near the vents.
Avoid getting soil into eyes - wash immediately with plenty of water and seek medical attention.
Keep the Mini Tiller clean to prolong working life.
After turning off the machine, keep your hands away from the tines as they still might be turning
after switching off the machine.
Engine should be turned off and cool before you touch any parts of the Tiller. Parts of the Tiller
get extremely hot during operation, and they remain hot for a short time after the unit is
turned off.
07