Publicidad
Idiomas disponibles
Idiomas disponibles
HVD042E
manual
10/22/01
ii :02
AM
Pag_/_7_
lnitiaM
Setup
Once you have plugged
the unit into an electrical
outlet,
let he unit run for at least 30 minutes to acclimate
itself before
making
ary adjustments.
During
this time the _'ed Wine light will stay on.
Temperature
inside the cooler,
if not adjusted,
will be at 55°-60°[
Temperature
Adjustments:
see.g. # 1
The wine cooler is preset from the factory
to automatically
accommodate
temperature
requirements
for red or white wines.
If you store mostly white wines, press the "White
Wine"
button and the
wine cooler will maintain
an average
temperature
between
45 ° to 50 ° F. Pushing the "Red Wine"
button will yield an
average
temperature
between
55 ° to 60 ° F.
The wine cooler can be s(t to any temperature
you desire to
accommodate
your wine storage
requirements.
To set the temperature,
pre'.s bolh the "White
Wine"
and "Red Wine"
buttons simultaneously
and hold for approximately
3 seconds, Now you are in temperature
set
mode.
Decrease the temperature
by pushing
the "White
Wine"
button
and increase
the temperature
by pressing
lhe "Red Wine"
button,
Pressing the appropriate
button 3 times will adjt st the temFerature
3
degrees,
press 4 times equals 4 degrees,
5 times equals
5 degrees,
and
so on. Once you have selected the temperature
you desire, push the
"On/Off"
button.
Now the wine cooler
is programmed
and the LED
readout
will return to current internal
temt:erature
reading.
fig.#1
[
O
I
F_L_WN
GI
I
uP
DNJDFF
]
Publicidad
