Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions
Remove lower oven door
A
B
A.
Oven door hinge lock in
locked position
B.
Oven door hinge lock in
unlocked position
10 English
Install_DOC30x977Dx_DG68-01317A-01_EN+MES+CFR.indb 10
Install_DOC30x977Dx_DG68-01317A-01_EN+MES+CFR.indb 10
1.
Open the oven door.
2.
Locate the oven door hinge locks in
both corners of the oven door, and
then rotate the hinge locks toward the
oven door to the unlocked position (see
illustration B). If the door hinge lock
is not rotated fully, the door will not
remove properly.
3.
Partially close the door to engage the
door latch locks.
The door will stop at this point.
4.
Using two hands, grasp the edges of
the oven door. Lift and pull the oven
door toward you and remove. You may
need to gently shift door from side to
side as you pull.
5.
Set the oven door aside on the
prepared covered work surface with the
oven door resting on its handle.
6.
To continue with the oven installation,
go to the "Positioning Oven Feet
for Multiple Cabinet Cutout Heights"
section.
CAUTION
The door of the upper oven cannot be removed.
Replace oven door
CAUTION
The door is very heavy. You may need help lifting the door high enough to slide it
into the hinge slots. Do not lift the door by the handle.
1.
2.
A
A.
Slot in the oven cavity for
door hinge lock
3.
Using two hands, grasp side edges of
door at the midpoint.
Face the oven cavity.
Locate the slots on each side of the
oven cavity for the door hinge locks.
At a 45° angle, align door hinges with
slots in the lower front of the oven
cavity. Slowly insert door, making sure
you maintain the 45° angle. You will
know the door is engaged in the slot
when you feel a slight drop.
2023-02-22 오후 7:03:46
2023-02-22 오후 7:03:46
Publicidad
