Presetting Stations - Yamaha TX-497 Manual De Instrucciones

TUNING

Presetting stations

■ Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This function enables this unit to
automatically tune into FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, A1 through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
FREQ/TEXT FREQ/TEXT EON EON
PTY SEEK PTY SEEK
MODE MODE START START
A/B/C/D/E
POWER 1 2
1
Press FM/AM to select the FM band.
"FM" appears in the front panel display.
FM/AM
2
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset group and MEMO and AUTO indicators
flash. Automatic presetting starts from the frequency
currently displayed and proceeds toward the higher
frequencies.
MEMO
When automatic preset tuning is complete, the front
panel display shows the frequency of the last preset
station.
12
2
1
FM/AM EDIT
MEMORY TUNING MODE
MAN'L/AUTO FM AUTO/MAN'L
TUNING
3 4 5 6 7 8
l
MEMORY
MAN'L/AUTO FM
AUTO
MHz
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in "Manually presetting
stations".
• If no station is received using the automatic preset tuning
method, "NOTHING" is displayed in the front panel display for
about 3 seconds and the search ends.
h
ST