Connections; Connecting The Am And Fm Antennas - Yamaha TX-497 Manual De Instrucciones

CONNECTIONS

CAUTION
Do not connect this unit or other components to the mains power until all connections are complete.

Connecting the AM and FM antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal
strength. Connect each antenna correctly to the designated terminals.
Outdoor FM antenna
Antenna adapter
(included for U.S.A. and
Canada models only)
75-ohm
coaxial cable
300-ohm
feeder cable
6
CONNECTIONS
Indoor FM antenna
(included)
FM ANT
75Ω UNBAL
75-ohm/300-ohm antenna adapter
(included for U.K. model only)
75-ohm
coaxial cable
Outdoor AM antenna
Use a 5 to 10 m of vinyl-
covered wire extended
outdoors from a window.
GND AM ANT
AM loop antenna
(included)
Ground (GND terminal)
For maximum safety and
minimum interference, connect
the antenna GND terminal to a
good earth ground. A good earth
ground is a metal stake driven into
moist earth.