Publicidad
Idiomas disponibles
Idiomas disponibles
the depth at which the target is located,
•
•
the degree of oxidation of the target,
the size of the target,
•
electro-magnetic and electrical interference surrounding the target,
•
measurements in the area of strongly mineralized soil, fertile ground or wet
•
sand - the detector will emit sound even if there is no metal in it. In this case
you can reduce the sensitivity. You can also increase the distance between the
probe and the ground,
metal digging tools placed near the unit.
•
TABLE OF METALS, TARGET IDENTIFIERS:
iron
Target
iron
objects
Tone
Low
Numerical
range of
00-10
the target
CAUTION!
cannot be uniquely identified until it is unearthed. The table is for general reference
only.
CAUTION!
mode, a medium or high tone will be emitted.
ILLUMINATION:
To turn on the backlight, press the MENU button and then select LIGHT. Adjust the
screen brightness level (0-9) using the "+" and "-" buttons.
The brightness level will be displayed on the LCD screen.
Caution: Since the backlight consumes more power, it is recommended to turn it off in
bright areas.
PP (PINPOINT):
When you find a metal object, you can use the PP (PINPOINT) function to determine
the precise position of the target.
5¢
aluminum,
nickel,
small gold
objects
Low
11-20
There is a wide variety of metals. The target detected by the unit
If the detector finds heavily oxidized iron when using DISC or NOTCH
P-Tab
ZN (1¢)
zinc,
aluminum,
aluminum,
can pull
medium-
tabs, some
sized gold
small gold
objects,
items,
bottle tops,
Medium
Medium
21-40
41-60
10¢
25¢
zinc,
aluminum,
copper
silver,
coins, large
aluminum
gold
objects
High
High
61-75
76-99
Publicidad
