Parkside PKIK 4.3 B3 Guia Rápido página 37

WARNING!
Do not apply any pressure to the screen and keep sharp objects away from
the screen. A broken screen represents a risk of injury. Wear gloves when
collecting the broken parts and contact the manufacturer if necessary.
If fluid does escape, proceed as follows:
•
If the fluid comes into contact with the skin, wipe off with a clean cloth
and rinse with plenty of water. Contact a doctor if necessary.
•
If battery fluid gets into the eye, rinse it out with plenty of clean water.
Then contact a doctor immediately or seek medical attention.
•
If the fluid is swallowed, first rinse the mouth out with water and then
drink plenty of water. Contact a doctor immediately!
The casing of the borescope must not be opened, there are no parts requiring
maintenance inside. The device must not be subject to any excessive
temperature fluctuations as this can lead to the moisture in the air condensing
and causing short-circuits. If the device has been exposed to extreme
temperature fluctuations, wait for it to reach the ambient temperature before
switching it on (about 2 hours).
Display
CAUTION! Operational safety
PARKSIDE PKIK 4.3 B3
English - 35