Publicidad
Idiomas disponibles
Idiomas disponibles
English
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the slot holder from the available PCI Express slot.
4.
Remove the slot holder from the available slot.
5.
Before you can insert the card into the PCI Express slot, please connect the
parallel port of the rear bracket to the PCI Express card.
6.
Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
7.
Use a screw to attach the card to the housing.
8.
Fix the rear bracket with a screw also on the housing.
9.
Reattach the housing and connect the power cord to the AC adapter.
Driver Installation
1.
Switch on your computer.
2.
The assistant for the Software Installation will appear. Click on "Cancel".
3.
Put the driver CD in the CD ROM drive.
4.
Navigate to the appropriate folder of your operating system under CD-drive\
ASIX\AX99100 and choose "AX99100_Setup.exe".
5.
Follow the instructions of the driver installation.
6.
Restart the computer under Windows after installation of the driver.
7.
After restart you can start using the device immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 05/2023
-2-
Publicidad
