3 Appliance description
The decorative design may deviate from the illustrations.
1. Front induction cooking zone
2. Rear induction cooking zone
3. Glass ceramic hob
4. Touch-Control panel
5. Control worktop ventilation
6. ON/OFF key
7. Cooking zone selection key front
8. Cooking zone selection key back
9. Plus key (raise) / Minus key (lower)
10. Power setting indicator
11. Symbol for timer function
12. Control lamp: lights up when the timer function is on
54
Appliance description
3774
3775
Operating the hob with the sensor keys
The glass ceramic hob is operated with touch control
sensor keys. The sensor keys are operated as follows:
lightly touch a symbol on the surface of the ceramic glass
plate. A buzzer will indicate when the controls have been
operated correctly.
The touch control sensor key will then be indicated as
"key".
ON/OFF key
(6)
This key is used to switch the entire hob on and off . It is,
as it were, the main switch.
Cooking zone selection key; e.g. front
Pressing one of the cooking zone selection keys
available will select a cooking zone, for which the Plus
key or the Minus key may be used to set the power level.
Minus key
/ Plus key
These keys are used to set the cooking levels, the
automatic switch-off device and the minute minder. The
Minus key reduces the setting and the Plus key raises it.
Power setting display
The power setting indicator shows the power setting
which has been selected, or:
lights up brightly.... Cooking zone has been selected
.......................... Residual heat display
.......................... Power boost
.......................... Childproof lock
.......................... Pan recognition
.......................... Error message
Control lamp ........ Timer function
(7)
(9)
(10)
GB