Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Installing the escutcheon
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Screw the bolts (H) into the escutcheon (F) and
ensure that the base plate (G) is pressed onto
the escutcheon (F) before the escutcheon (F)
is installed over the three holes in the sink.
□
From underneath sink, hand tighten the
mounting nuts (I). Do not overtighten.
NOTE: If the sink is uneven, use silicone under the base
plate (G).
H
I
4
F
G
6
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Retract the hose (1) up through the faucet body,
until the hose tting is ush with the bottom of
the shank (2). Do not pull the hose tting past
the shank.
□
Insert the faucet assembly (A) through the hole
in the escutcheon (F).
NOTE: Do not feed the hose (1) back down through the
spout until step 6.
2
1
A
F
Publicidad
