Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
REMOTE SCREEN INDICATORS
FOLLOW ME
There is a temperature sensor built into the remote control that will monitor the room temperature. Keep
the remote control with you and the appliance will automatically adjust the set temperature based on the
temperature where you are located.
The remote will display the temperature at its location. The remote will send a signal to the air conditioner
every 3 minutes, so long as you remain within range of the appliance.
The follow me light on the control panel will illuminate for 5 seconds every 3 minutes to indicate that it has
received a signal from the remote. If the appliance does not receive a signal from the remote during any 7
minute interval it will beep to indicate that the follow me mode has ended.
The maximum distance for the follow me feature is 8 meters (26 feet). This feature is available in cool and
auto modes.
Note:
The Follow Me function is available in Cool and Auto mode.
LOCK
The Lock function will lock all of the buttons on the remote to prevent accidental changes.
Press the LED and °C/°F buttons at the same time and hold for a minimum of 5 seconds.
Note:
The Lock function can be cancelled by pressing the LED and °C/°F buttons at the same time for 2 seconds.
SILENCE FEATURE
This feature can only be active by remote control. Press and hold the fan button on the remote control for 3
second to active silence feature.
TIMER
Auto Off
1. When the air conditioner is turned on, press the timer button to activate the auto off timer.
2. Press the temperature control buttons to change the set time in 0.5 hour increments up to 10 hours and
then in 1 hour increments up to 24 hours.
Auto On
1. When the air conditioner is turned off, press the timer button to activate the auto on timer.
2. Press the temperature control buttons to change the set time in 0.5 hour increments up to 10 hours and
then in 1 hour increments up to 24 hours.
17
Publicidad
