Publicidad
Idiomas disponibles
Idiomas disponibles
9. Remove the water diffuser cap by squeezing
the two tabs as shown in Figure 3. Rinse the
cap in clean water to remove any debris. If
the cap contains hard water residue, soak it in a
mixture of one (1) quart of water and two (2)
ounces of vinegar for 20 minutes. Rinse well
and reinstall the water diffuser cap. Do not
expose motor or other electrical components to
water.
10. Wipe the surfaces of the main housing with a
soft cloth.
Tab
Figure 3
If you have any additional questions or problems with your Care Free ® Humidifier, please call 1-888-830
1326 (CAN 1-866-268-1936) or contact us over the Internet at www.hunterfan.com. Refer to Figure 1 for
part names.
© 2008 Hunter Fan Company
Water Diffuser Cap
Service Parts
Water Diffuser Cap
Water Dispersion Tray
Base
Water Tank
Power/Speed Control
Tank Cap
PermaWick™ Filter
11. Once all the parts are clean, reassemble
the humidifier, and follow the USING YOUR
HUMIDIFIER to continue use.
If you are storing the humidifier, make sure the
parts are completely dry, reassemble, and stor
in a dry location.
Tab
86249
94099
94105
95857
76737
94104
94124
6
43049-01 04/07/20
Publicidad
