Descargar Imprimir esta página

INVENTOR INVMS66A Manual De Usuario página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
11. TIPS
Do not place products too close. Ensure a sufficient distance for optimum air circulation
in the refrigerator.
Avoid extensive use of the door on wet and hot weather, keep in mind, once the door
is opened to shut the soonest possible.
Do not place goods in direct contact with the wall of the refrigerator, always allow
some space.
Never place inside the unit, hot or even warm goods without allowing them to chill first.
Be certain the wall behind the appliance is dirt and dust free, especially with outer
condenser equipped units.
Do not place goods that are not sealed or well packed directly under the chill box.
12. TROUBLESHOOTING
ISSUE
Appliance is not
working
Temperature in
refrigerator is too
high or too low
Condensation
appears on the
outside surface of
the unit
Appliance is
making a noise
Odor
EN
CAUSE / REMMEDY
The plug is not in the socket. Put the plug in the socket.
Thermostat has been set incorrectly. Set the thermostat
correctly.
This may be caused by a change in the room's temperature.
Use a soft cloth to wipe away any condensation. If the
problem remains, contact a certified technician for
assistance.
1) The refrigerant liquid causes noises in the cooling system.
2) Noise is produced while the compressor is operating, as
refrigerant fluid is being pumped within the unit.
3) Make sure the refrigerator is levelled and balanced.
4) Goods have been placed incorrectly in the refrigerator.
Place the goods correctly in the refrigerator.
5) Check if the refrigerator's components are in the proper
position.
1) Goods are not stored in sealed containers
2) There are spoiled goods inside
3) The interior needs to be cleaned
15

Publicidad

loading

Este manual también es adecuado para:

Invms66a-bsInvms66ab-bs