Glacier bay HD67679-5104 Guía De Uso Y Mantenimiento página 7

Installation (continued)
7
Installing the escutcheon and
the seat
□
Place the escutcheon (D) over the standpipe of
the faucet assembly (C).
□
Remove the sleeve (1) from the inlet tube.
Secure the seat (E) to the faucet assembly (C)
using washers (F) and screws (G). Tighten the
screws (G) with the hex wrench (S, Hex: 6mm).
C
D
G
1
E
F
8
Installing the faucet assembly
□
Locate the faucet assembly (C) onto the rough
body (N), then push the connections of inlet
supply line into the rough body (N).
□
Secure the faucet assembly (C) to the rough
body (N) using washers (F) and screws (H).
Tighten the screws (H) with the hex wrench
(S, Hex: 6mm).
□
Push the escutcheon (D) to the base.
NOTE: Do not to reverse the cold and hot supply. Make
sure the faucet side with the botton (1) faces the tub.
C
C
D
E
F
G
S
C
7
Please contact 1-855-HD-GLACIER for further assistance.
1
N
S
H
F
N
HOMEDEPOT.COM
C
D
N
D
D