5. Device overview
5.1. Front
MD 30018:
3
MD 30019 / MD 30020:
3
2
1. LCD screen
2.
: Multifunction button for standby function,
switching channels, selecting input source or
controlling volume. When the device is in stand-
by mode, you can switch on the device by briefly
pressing the button. Briefly press the button
when the device is in use to open the function
menu. Then briefly press the button again to se-
lect the desired function. Press and hold the but-
ton to open the menu for the selected function.
In the case of the standby function, the device
then switches to standby mode. You can change
the setting in the menu by briefly pressing the
button. Then press and hold the button to apply
the settings made. The function menu closes au-
tomatically after a few seconds of inactivity.
3. Infrared sensor: Reception field for the infrared
TV signals.
Operating light: Lights up when the device is in
standby mode.
2
1
1
5.2. Rear and right-hand side
11
SPDIF
10
Optic. out
R
L
Video
BACK AV IN
1. COMMON INTERFACE (CI+): Card slot for con-
necting pay TV cards
2. USB (5V
, 500 mA max.): USB connection for
media playback/recording (PVR)
3. HDMI 1: HDMI connection for devices with a
HDMI output
4.
: For connecting headphones with 3.5 mm
jack
5. HDMI 2-3: HDMI connection for devices with a
HDMI output (HDMI 2 can be used for ARC)
6. LNB (13 V/18 V
, 300 mA max.): For connect-
ing the antenna (satellite)
7. ANT.: For connecting an aerial (analogue, DVB-T
or DVB-C)
8. VGA: VGA port for connecting a PC or a YUV
adapter (optional)
9. BACK AV IN: Audio/video input (cinch)
10. SPDIF Optic. OUT: Digital audio output (optical)
11. LAN: Network connection to connect to the In-
ternet
13
12
12. Connection for mains plug
Please only use the mains connection ca-
ble supplied for this purpose.
13. Fixing holes for a wall mount
Vesa standard, hole spacing
75 x 75 mm (MD30018)
100 x 100 mm (MD30019)
100 x 100 mm (MD30020)
5
1
6
USB
13 Vdc/18 Vdc
2
5Vdc
Max. 500mA
7
USB
2
8
5Vdc
Max. 500mA
3
9
4
7
DE
FR
IT
NL
EN
ES