Medion LIFE P13207 Guida Rapida página 67

6. Getting started
Before using for the first time, ensure you
read the "Safety instructions" section.
6.1. Unpacking
• Select a suitable place for setting up the device
before unpacking.
• Open the box very carefully, to avoid damaging
the device. The device might get damaged if you
use a knife with a long blade to open the box.
• The box contains a number of small items (includ-
ing batteries). Keep these out of the reach of chil-
dren, as they represent a choking hazard.
• Store the packaging material in a safe place. Only
use this box to transport the TV.
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or
used improperly, creating a risk of
choking and suffocation.
 Keep packaging material such as
plastic film or plastic bags away
from children.
6.2. Mounting
Attach the feet as shown in the illustration. Carry out
this step before connecting the Smart TV.
6.3. Inserting batteries in the re-
 Remove the battery compartment cover on the
back of the remote control.
 Insert two LR03 (AAA) 1.5 V batteries in the battery
compartment of the remote control. Check the
battery polarity (see label on the bottom of the
battery compartment).
 Close the battery compartment.
6.4. Connecting the antenna
Your smart TV supports different antenna signals.
You can input the following image signals to the tel-
evision through the socket labelled ANT.:
• Via analogue cable/an analogue house aerial
• Via a DVB-T2/ DVB-T
• Via a DVB-C
tion)
 Insert the antenna cable either from the house
aerial/analogue cable connection, a DVB-T anten-
na or the DVB-C connection in the antenna socket
on the Smart TV.
You also have the option of connecting a digital sat-
ellite system to the socket labelled LNB.
 Screw a coaxial antenna cable's F connector onto
the connector on the Smart TV.
6.5. Connecting the power sup-
2 x M5x20
 Connect the supplied power cord to the mains
connection socket of the device.
 Connect the mains plug on the device to an easily
accessible 220 to 240 V ~ 50 Hz mains socket.
1 This service must be available in your region.
mote control
NOTICE!
Risk of damage!
The remote control can be damaged
by leaking batteries if not used for a
long period of time!
 Remove the batteries from the re-
mote control if the device is not go-
ing to be used for a long period.
1 antenna or
2
connection (digital cable connec-
ply
DE
FR
IT
NL
EN
ES
9