Publicidad
Idiomas disponibles
Idiomas disponibles
5. Device overview
5.1. Front
MD 30042:
3
MD 30043 / MD 30044:
3
2
1. Screen
2.
: Switch the device on and off
3. Infrared sensor: Reception field for the infrared
remote control signals.
Operating light: lights up when the device is in
standby mode.
5.2. Rear and right-hand side
11
SPDIF
10
Optic. out
R
L
Video
BACK AV IN
1. COMMON INTERFACE (CI+): Card slot for con-
necting pay TV cards
2. USB (5 V
, 500 mA max.): USB connection for
media playback/recording (PVR)
2
1
1
5
1
6
USB
13 Vdc/18 Vdc
2
5Vdc
Max. 500mA
7
USB
2
8
5Vdc
Max. 500mA
3
9
4
3. HDMI 1: HDMI port for devices with HDMI output
4.
: For connecting headphones with 3.5 mm jack
5. HDMI 2-3: HDMI connection for devices with
HDMI output (HDMI 2 can be used for ARC)
6. LNB (13 V/18 V
, 300 mA max.): For connect-
ing the antenna (satellite)
7. ANT.: For connecting the antenna (analogue,
DVB-T or DVB-C)
8. VGA: VGA port for connecting a PC or a YUV
adapter (optional)
9. BACK AV IN: Audio/video input (cinch)
10. SPDIF optic. OUT: Digital audio output (optical)
11. LAN: Network connection for connection to the
Internet
13
12
12. Connection for mains plug
Please only use the mains connection ca-
ble supplied for this purpose.
13. Fixing holes for a wall mount
MD 30042: Vesa standard, hole spacing 75 x 75
mm
MD 30043 / MD 30044: Vesa standard, hole spac-
ing 100 x 100 mm
Wall mount not supplied. When mounting
the device, make sure that you use M4
screws. The maximum length of the screws
corresponds to the thickness of the wall
mount plus 7 mm.
The TV must not be mounted at heights
exceeding 2 m. The device must be mount-
ed on a solid surface such as cement or
concrete.
DE
FR
IT
NL
EN
ES
7
Publicidad
