Medion LIFE P13242 Guida Rapida página 67

6.6. Switching the Smart TV on
and off
 The device will be in standby mode as soon as
you have connected the mains plug to the mains
socket.
 To switch on the device, press
– on the remote control: the standby/on but-
ton, one of the number buttons or one of the
  buttons;
P /
– on the device: the switch
 Use the standby/on button on the remote control
to switch the device back into standby mode. The
device will be switched off, but will continue to
use power.
6.7. Initial installation after
switching on for the fi rst
time
You will be guided through the initial installation
after you switch on the device for the first time. You
can call up the initial installation at any time via the
SETTINGS > DEVICE PREFERENCES > ABOUT >
FACTORY RESET menu and run it again.
 Use the direction buttons  and the
button to select and confirm the relevant options.
Press the button to return to the previous
menu
For a comprehensive description of initial
installation, please refer to the detailed
user manual. Please scan the QR code
below to access the
MD 30042
MD 30044
10
.
O K
download.
MD 30043
7. Troubleshooting
Malfunctions can sometimes have quite trivial caus-
es, but they may also be the result of defective com-
ponents.
For a list of possible malfunctions and cor-
responding solutions, please refer to the
detailed user manual (see QR code in the
previous section).
8. Product data sheet
Scan the QR code that matches the model
on the energy label or alternatively in the
operating instructions to download the
product data sheet.
MD 30042
MD 30043
MD 30044
trademarks of HDMI Licensing LLC.
Other trademarks are the property of their respective
owners.
The HDMI logo and High
Definition Multimedia
Interface are registered