Next Level Racing Go Kart Plus Manual De Instrucciones página 6

support@nextlevelracing.com
01
Align the holes in the Monitor Mount Uprights with the nut inserts in the Monitor Mount Upper. Bolt
through and secure with 4 x M8 Bolts and Washers.
NOTE: Choose a suitable
height for the Cross Bar, this will
determine your monitor height.
02
Align the holes in the Cross Bar with the selected holes in the Monitor Mount Upper. Bolt through and
secure with 4 x M8 Bolts, Washers, and Flange Nuts.
03
Align the slots in the top and bottom of the Vesa Mount with the nut inserts in the Cross Bar. Bolt
through and secure with 4 x M8 Bolts and Washers.
6
PARTS:
• • 2 x Monitor Mount
Uprights
• • 1 x Monitor Mount
Upper
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
PARTS:
• • 1 x Cross Bar
• • 4 x M8 45mm Bolts
• • 4 x M8 Flange Nuts
• • 4 x M8 Washers
PARTS:
• • 1 x Vesa Mount
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers