Â
À
Affix sealing tape!
3064441_201802
KGXD stacked air routing
(with external bypass)
Ã
4. Place element and secure 2nd and 3rd element with screws.
Á
The threaded connections are located on the front and rear of each plate element.
Re-mount the middle frame section (2 pieces) in the marked position with a plastic
strip (screws on the front and back).
Each gasket must be fixed to the face of
each element!
Slide the whole plate element up to the
end-stop of the sealing tails.
This is the final position.
Assemble and slide in the next divided
element in the same way.
45