BOHELL TALI12 Manual De Instrucciones página 20

SPECIFICATIONS:
Rated Voltage
Battery Capacity
No load speed
Max drilling torque
Max capacity in steel
Max capacity in wood
Drill chuck capacity
Keyless chuck
Nr. Of torque settings
Reversible / Electronic
Charging time
Weight
Sound pressure lvl
Sound power lvl
Vibration
- NB: These specifications are subject to change
without notice of purpose of improvement.
- NB: By virtue of the conditions of fabrication
of this product, the maximum used power can
differ from that specified.
- Measured sound level determined according EN
60745-1
- The vibration emission level given in this infor-
mation sheet has been measured according
EN 60745-1 and may be used to compare one
tool with other. It may be used for a preliminary
assessment of exposure
- The vibration value during actual use of the
power tool can differ from the declared total val-
ue depending on the way in which tool is used
- It's necessary identify safety measures to pro-
tect the operator that are based on an estima-
tion of exposure in the actual conditions of use
(taking account of all parts of the operating cy-
cle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
12 V
- The materials of which the packaging of this
1,3 A·h
appliance consists are included in a collection,
classification and recycling system. Should you
0-750 rpm
wish to dispose of them, use the appropriate
15 Nm
public recycling bins for each type of material.
- The product does not contain concentrations of
10 mm
substances that could be considered harmful to
15 mm
the environment.
10 mm
HOW TO REMOVE THE BATTERIES FROM
Yes
THE INTERIOR OF THE DEVICE:
17+1
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
Yes
apparatus.
3-5 hours
- To remove the batteries, once the life of the
1 Kg
appliance, proceed as follows:
- Remove the batteries using the Battery release
L = 68,7 dB(A)
PA
button.
K = 3 dB
PA
L = 79,7 dB(A)
WA
K = 3 dB
WA
1,09 m/s
2
K=1,5 m/s
2
DECLARATION OF CONFORMITY
- We hereby declare, under our own responsibil-
ity, that the BOHELL products described in this
manual TALI12 comply with the following stan-
dards: EN 60745-1 EN 60745-2-2, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3 and
EN 62321 in accordance with EU Directives
2006/42/EC, 2014/30/EU and 2011/65/EU.
This symbol means that user must
to consult safety warnings and
instructions thoroughly before use.
This symbol means warning
This symbol means that tool is class
II
This symbol means that in case you
wish to dispose of the product once
its working life has ended, take it to
an authorised waste agent for the
selective collection of Waste from
Electric and Electronic Equipment
(WEEE).
This symbol means that product
may include a battery or batteries;
user must to remove them before
disposing of the product. Remember
that batteries must be disposed of in
duly authorised containers. Do not
dispose of them in fire.