Descargar Imprimir esta página

Beamz FlatPAR 12x3W TRI-LED IR Manual De Instrucciones página 10

Publicidad

Technical specification
LED
: 12×3W Tri-LED
Control signal : DMX signal
DMX Channel : 3 / 7
Function
: DMX, Master-Slave, Auto, Sound mode
Voltage
: AC100-240V 50/60Hz
Fuse
: 3A
Power
: 72Watt
Dimension
: 198 x 198 x 228mm
Weight
: 1,8Kg
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit's weight.
Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people
and has no one pass by or under it.
How to control the unit
Three ways to operation:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
The unit can be linked together in daisy chain as many as you need in master/slave mode to perform the great
built-in pre-programmed lighting shows triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit
: when working at Auto-run or Sound Control mode operation
Slave units
: DMX start address MUST be set to d001.
DMX Operation
3 Channel modes
DMX
Value
Channel
CH1
0-255
CH2
0-255
CH3
0-255
Feature
Red
Green
Blue

Publicidad

loading

Este manual también es adecuado para:

151.273