Publicidad
Idiomas disponibles
Idiomas disponibles
Before you start
Here are a few things you should know before starting your dryer.
Sort and load
• Put one wash load in the dryer at a
time.
• Do not mix heavy and lightweight items
together.
• To improve drying efficiency for one or
two items, add a dry towel to the load.
• For best results, untangle items
before inserting them into the dryer.
Tangled items may degrade the drying
efficiency or cause the door to open.
Functional prerequisite
Lint filter
Untitled-3 39
• Overloading reduces the tumbling
performance, resulting in uneven
drying and wrinkling.
• Unless recommended on the care label,
do not dry woolens or fiberglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol,
gasoline, etc.
To prevent a risk of fire, make sure to
clean the lint filter before or after every
load.
1. Turn off the dryer.
2. Open the door and pull out the lint filter
(A) from inside the drum.
3. Remove the lint, and then clean the lint
filter.
A
4. Reinsert the lint filter, and then close
the door.
• Do not operate the dryer without the
lint filter in place.
• Do not use a damaged or broken lint
filter. This may reduce performance
and/or cause fire.
CAUTION
English 39
2021-05-11
6:02:31
Publicidad
