Vaporfi vBit Manual De Usuario página 5

BUILDING YOUR ATOMIZER
FOLLOW THESE QUICK AND EASY STEPS TO BUILD YOUR vBit RDA.
1. Cut a piece of Kanthal wire 6" in length.
2. Using the provided screwdriver, hold the screwdriver handle and the Kanthal wire
between your thumb and forefinger.
3. Then, tightly wrap the wire around the metal part of the screwdriver
4. Once you have completed wrapping your wire, leave an extra inch of wire and cut off the
rest.
5. Straiten the leads to mount on the RDA.
6. You should now have a coil.
7. Repeat steps 1-6 to create your second coil.
03