Publicidad
Idiomas disponibles
Idiomas disponibles
Settings Menu
1. Press and hold All Off and Timer pads together for 3
seconds.
2. To navigate through the Settings Menu, use the + and
- buttons on the Display. To select a menu, press the
Timer pad.
Settings Menu Chart
Factory
FACtr St
Settings
Control Lock
Loc
LED Light Level LEd
Button Volume
Touch Snd
Timer Alarm
tonE Snd
Volume
Temperature
dEG Unit
Units
12
Timer Pad
No - exits out of the Factory reset menu and then takes the user back to the main
menu.
Yes - clears customized settings and restores defaults.
USEr - Controls are only locked by the user.
Auto - In addition to the standard lock behavior, the controls shall also lock if no
burner or timer has been active for 10 minutes as well as there has been no key
press for 10 minutes.
100% brightness
rEG - 80% brightness
Lo - 60% brightness
Hi - All touch key sounds activated at maximum volume
Lo - All touch key sounds activated at low volume.
OFF - All touch key sounds are turned off.
Cont - Timer plays tone continually until the user acknowledges the timer end
tone.
bEEP - The timer end tone is played only once.
F - Temperature units in Fahrenheit
C - Temperature units in Celsius
3. To activate a Setting, press the Timer pad.
4. To exit Settings Menu, press and hold the All Off
pad.
49-2001131 Rev. 2
Publicidad
