HPS EnduraCoil 1.2 KV Manual De Instrucciones página 5

Lifting Procedures (continued)
Shouldered
Lifting Angle
3/4" CÁNCAMOS
ÁNGULO DE ELEVACIÓN
Eye Bolts
CON HOMBRO
FIGURE 1
FIGURA 1
FIGURE 2
FIGURE 3
FIGURA 2
Before a lift is made, the following instructions should be read
and understood.
1. Remove the roof of DH type of enclosure (see figure 2) or
2. Inspect that the lifting eye bolts or lifting angles are
3. Verify lifting capacity of chains or slings, crane or
4. Measure the distance between the eye bolts or lifting
continued on following page
REMOVE THE COVER
RETIRE LA PLACA DE CUBIERTA
PLATE
lifting cover plate on roof of power enclosure (see figure
3).
properly seated and tight.
other means refer to the weight of transformer on the
nameplate.
angles (see figure 4 & 5).
FIGURE 4
FIGURE 5
FIGURA 4
DISTANCE
DISTANCIA
BETWEEN
ENTRE
EYE BOLTS
CÁNCAMOS
FIGURA 3
DISTANCE BETWEEN
DISTANCIA ENTRE LOS
ÁNGULOS DE ELEVACIÓN
LIFTING ANGLES
IOMGCAS / May 2014
5