AENO VS1 Guia De Inicio Rapido página 8

responsible for their safety. Before using the device, make sure that the rated
voltage and frequency specified in the technical specifications correspond to
the mains supply. Do not use a damaged device. The device must be repaired
by a qualified technician at an authorized service center. Do not allow the
power cord to come into contact with sharp objects or hot surfaces. Do not
immerse the plug, power cord and/or device in water or other liquids. Place the
device away from external heat sources or other electrical appliances. Use only
those bags, containers, and hose that are recommended by the manufacturer.
After using the device, do not touch the sealing bar and sealing seam until they
have cooled down completely. Before placing food that is packaged in a bag or
container in the microwave oven, make a hole in the bag or open the outlet
valve in the container to allow steam to escape. Do not allow liquids, crumbs,
or food particles to enter the vacuum chamber. Unplug the device when it's
not in use and before cleaning. Let the device cool down after use. Clean the
device after each use. Do not use chemical and aggressive detergents, abrasive
pastes, products containing acids and solvents or metal sponges for cleaning.
Place a paper liner inside to prevent deformation of the gasket, and do not
close the lid tightly while storing the device. Do not leave the device that has
been switched on unattended. Do not allow children to use and/or play with
the device. Detailed information can be found in the complete User Manual,
available for download at aeno.com/documents.
LED indication
Status
On (blue)
Off
Functions of Buttons
Action
"Vac Seal" button
Press twice
8
Description
One of the operating modes ("Vacuum Sealing", "Vacuum",
"Sealing") is started
The device is off
Description
Start the "Vacuum Sealing" or "Vacuum" mode
aeno.com/documents