Proxxon HKP/A Manual página 7

Caution!
Never set the device down on a combustible
surface! Please note: Even after switching off,
individual drops of adhesive can still emerge
from the nozzle. Risk of burns!
After working, always allow the device to cool
down completely before storing it or putting it
away!
Here are a few more practical tips:
• Bonding surfaces can be released again
through heating (e.g. with a heat gun).
• Adhesive drops are easily removed when
they have cooled down.
• When bonding heat-sensitive materials, ap-
ply the adhesive to the less sensitive side.
Cleaning and Care
Every device becomes soiled during work.
Cleaning is therefore essential. To ensure a long
service life, the device should be cleaned with a
soft cloth or brush after each use.
Do not use solvents or cleaning agents contai-
ning alcohol (e.g. petrol, cleaning alcohols, etc.)
to prevent damage to the plastic parts.
Disposal:
Old electrical appliances must not
be disposed of with household
waste. The device contains valuable
materials which can be recycled. If
you have any questions on this sub-
ject, please contact your dealer, your
waste disposal company or other
appropriate local authority.
According to the European Directive
2012/19/EU, power tools that are no
longer serviceable and according
to the European Directive 2006/66/
EC, defective or used rechargeable
batteries/batteries must be collected
separately and recycled in an envi-
ronmentally sound manner.
EU Declaration of conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
We declare under our sole responsibility that
these products comply with the following di-
rectives:
EU Low Voltage Directive 2014/35/EU
EU EMC Directive 2014/30/EU
EU-RoHS-Directive 2011/65/EU
These standards were applied:
EN 60335-1:2014
EN 60335-2-45:2012
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Date: 17.02.2022
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Hot glue gun
HKP/A with charger
28190
- 9 -