Publicidad
Idiomas disponibles
Idiomas disponibles
Installation, continued
@ Connecting Procedures
Turn off your computer
Connect the signal, power and audio connectors as shown below
Tum the monitor on, then turn on the computer
A. IBM PS / 2 or PC / AT compatible models
(D Connect the supplied signal cable to the monitor's port
(2 Connect the supplied AC power cord to the CEE-22 connector
@ Connect the supplied audio cord to the AUDIO IN connector and hook it
(4) Position the AC power cord, signal cable A and audio cord A in clamper A
©) Position the signal cable B and the audio cord B in clamper B
(6) Attach the cable covers refernng to page 9
@ Connect the other end of the supplied signal cable to the computer's corresponding 15 pin mini D-
Sub video connector
Connect the other end of the AC power cord to a grounded power outlet
Note
| For dual connection, prepare commercially available signal cable and audio cord
|
(D Signal cable A
(3) Audio cord A
DC power cord
(D Signal cable B
for USB base
(3) Audio cord B
(2 AC power cord —
CEE-22
AS
connector
1
@ Hook B
(4) Clamper A
© Clamper B
(3) Hook A
B. Apple computers
(D Use a UNIMAC-82D MAC adapter
Panasonic MAC adapter
If you need an adapter and one is not provided by your dealer,
call 1-800 PANASYS (1-800-726-2797)
Caution
* To prevent the cable from coming loose, the cable connectors must be securely fastened with screws
Publicidad
