Página 1
3136096 29986 31361 TWIN \ FULL METAL BUNK BED 150 Lbs Weight Limits: DO NOT RETURN PRODUCT TO THE 68 Kgs STORE STOP Individual stores do not stock parts. If a part is missing or damaged, call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge.
Página 3
PARTS REAR POST 1 T903650 QTY: 1 FRONT POST 1 FRONT POST 2 REAR POST 2 T903670 T903680 T903660 QTY: 1 QTY: 1 QTY: 1 REAR GUARD RAIL T903690 QTY: 2 MIDDLE RAIL T903700 QTY: 1 UPPER SAFETY SIDE SAFETY RAIL SIDE GUARD RAIL...
Página 4
PARTS UPPER SLAT POST LOWER SAFETY RAILS T903750 LINKS T903740 QTY: 22 T903770 QTY: 2 LADDER QTY: 4 T903760 QTY: 2 POST RAILS T903790 LOWER SLAT QTY: 2 T903751 BELT QTY: 22 T903780 QTY: 3 4 /16 B34313609600...
Página 5
PARTS SCREW LOCK NUT BOLT BOLT ST 1/4'' x 10mm 1/4" 5/16" x 7/8" 1/4-20 x 7/8" T115230 A20430 T128080 T125090 QTY: 24 QTY: 4 QTY: 16 QTY: 24 BOLT 1/4-20 x 55mm A19650 QTY: 6 WRENCH HEX KEY T129010 QTY: 1 T290110 QTY: 1...
Página 6
ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR BOTH, TO HELP PREVENT THE LIKELIHOOD OF ENTRAPMENT OR FALLS. TO PREVENT INJURY, DHP RECOMMENDS ONE TWIN SIZE MATTRESS AND ONE FULL SIZE MATTRESS TO BE USED. USE ONLY A TWIN MATTRESS WHICH IS 74"-75" LONG AND 37 1/2"-38 1/2" WIDE ON UPPER BUNK AND A FULL MATTRESS WHICH IS 74"-75" LONG AND 53 1/2"-54 1/2" WIDE ON LOWER BUNK.
Página 7
Attach two POST LINKS (M) to the POST RAIL (O) with four SCREWS (4). Assemble POST LINK (M) to REAR POST 1 (A) and FRONT POST 2 (D) with the SCREWS (4) as shown. Repeat to attach the remaining POST RAIL (O) to the REAR POST 2 (B) and FRONT POST 1 (C).
Página 8
Attach the SIDE GUARD RAIL (I) to the REAR POST 1 (A) and the FRONT POST 2 (D) with the BOLTS (2). Attach the SIDE SAFETY RAIL (H) to the REAR POST 1 (A) and the FRONT POST 2 (D) with the BOLTS (2). Attach the LADDER (L) to the SIDE GUARD RAIL (I) and the SIDE SAFETY RAIL (H) with the BOLTS (1) and NUTS (5) at the bottom of the LADDER as shown.
Página 9
Attach the REAR GUARD RAILS (E) to the right and left end assemblies with the BOLTS (2) as shown. Attach the UPPER SAFETY RAILS (G) to the right and left end assemblies with the BOLTS (3) as shown.Attach the UPPER SAFETY RAILS (G) to the GUARD RAILS (E) with the BOLTS (1) as shown.
Página 10
Attach the MIDDLE RAIL (F) to the SIDE SAFETY RAILS (H) with the SCREWS (4) as shown. Hardware Required 10 /16 B34313609600...
Página 11
Attach 22 of the LOWER SLATS (P) to the LOWER SAFETY RAILS (J) by inserting each end of the LOWER SLATS (P) into each LOWER SAFETY RAIL (J) and pushing as shown by the arrow in the detail below. Repeat this proceedure to attach the UPPER SLATS (K) slats into the UPPER SAFETY RAILS (G).
Página 12
Attach the BELT (N) to the SIDE SAFETY RAILS (H) and the SIDE GUARD RAILS (I) with the SCREWS (4) as shown Hardware Required 12 /16 B34313609600...
Página 13
B34313609600 HERMANE \ POR COMPLETO CAMA DE CUCHETA Limites Del Peso: 150Lbs\68Kgs (TAPA) - 300 Lbs\136Kgs (FONDO) NO REGRESAS ESTA PRODUCTO A LA TIENDA ALTO Las tiendas no tiene partes. Si falta partes o las partes esten danados llame gratis a la servicio del cliente. Con gusto mandarnos las partes. Sin alguno carga. Nesacitas partes o Asistancia? o visitar la pagina del internet www.dhpfurniture.com Para servicio mas rapido y reliable por favor tenga esta manual listo.
Página 14
PROBABILIDAD DE LA TRAMPA O DE CAÍDAS. * PARA PREVENIR LESIÓN, DHP RECOMIENDA UN COLCHÓN GEMELO DEL TAMAÑO Y UN COLCHÓN DEL MISMO TAMAÑO QUE SE UTILIZARÁN. * UTILICE SOLAMENTE Un COLCHÓN GEMELO QUE SEA 74"-75" DESEE Y DESEEN 37 1/2"-38 El 1/2" DE PAR EN PAR EN La CUCHETA SUPERIOR Y Un COLCHÓN LLENO QUE SEA 74"-75"...
Página 15
PAGE 07 Ate dos ACOPLAMIENTOS del POSTE (M) al CARRIL del POSTE (O) con cuatro TORNILLOS (4). Monte el ACOPLAMIENTO del POSTE (M) el POSTE POSTERIOR 1 (A) y el POSTE DELANTERO 2 (D) con los TORNILLOS (4) como se muestra. Repita para atar el CARRIL restante del POSTE (O) al POSTE POSTERIOR 2 (b) y PARA AFRONTAR EL POSTE 1 (C).