Página 1
3135196 29986 31352 150 Lbs Weight Limits: DO NOT RETURN PRODUCT TO THE 68 Kgs STORE STOP Individual stores do not stock parts. If a part is missing or damaged, call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge.
Página 3
PARTS LEG POST 1 T903200 LEG POST 3 QTY: 1 LEG POST 2 FRONT T903220 REAR T903210 GUARD QTY: 1 GUARD QTY: 2 RAIL RAIL T903250 T903240 QTY: 1 QTY: 1 1 HOLE 3 HOLES 1 AGUJERO 3 AGUJEROS UPPER SIDE LADDER SIDE RAIL RAIL...
Página 4
PARTS POST LINKS T903320 SLATS QTY: 4 T903300 QTY: 44 LADDER T903310 QTY: 1 BELT T903330 QTY: 2 POST RAILS T903340 QTY: 2 4 /16 B34313519600...
Página 5
PARTS HEX KEY SCREW BOLT 4.2 x 10mm BOLT HEX KEY 1/4-20 x 20mm T290110 T115230 5/16" x 20mm T125090 QTY: 1 QTY: 20 T128080 T290120 QTY: 22 QTY: 16 QTY: 1 BOLT 1/4-20 x 55mm T126580 QTY: 5 WRENCH T129010 QTY: 1 1/4-20...
Página 6
ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR BOTH, TO HELP PREVENT THE LIKELIHOOD OF ENTRAPMENT OR FALLS. TO PREVENT INJURY, DHP RECOMMENDS ONE TWIN SIZE MATTRESS AND ONE FULL SIZE MATTRESS TO BE USED. USE ONLY A TWIN MATTRESS WHICH IS 74"-75" LONG AND 37 1/2"-38 1/2" WIDE ON UPPER BUNK AND A TWIN MATTRESS WHICH IS 74"-75" LONG AND 37 1/2"-38 1/2" WIDE ON LOWER BUNK.
Página 7
Attach the POST LINKS (M) to the POST RAILS (O) with the SCREWS (4). Attach the POST RAILS (O) to the the LEG POSTS (A and B) with the SCREWS (4) as shown. Attach the END GUARD RAILS (I) to the LEG POSTS (A and B) with the BOLTS (2) as shown.
Página 8
Attach the POST LINKS (M) to the POST RAILS (O) with the SCREWS (4). Attach the POST RAILS (O) to the the LEG POSTS (C and B) with the SCREWS (4) as shown. Attach the END GUARD RAILS (I) to the LEG POSTS (C and B) with the BOLTS (2) as shown.
Página 9
Attach the SIDE RAILS (Gm H & J) to the LEG POSTS (A, B & C) with the BOLTS (3) as shown below. Hardware Required 9 /16 B34313519600...
Página 10
Attach the GUARD RAILS (E & F) to the LEG POSTS (A & B) and the SIDE RAILS (G & F) with the BOLTS (1 & 2) as shown. Hardware Required 10 /16 B34313519600...
Página 11
Push the ends of each SLAT (K) into the slots in each SIDE RAILS (G, H & J) as shown. 11 /16 B34313519600...
Página 12
Attach the LADDER (L) to the LADDER SIDE RAIL (H) with the BOLTS (1) and NUTS (7) as shown. Attach the BELTS (N) to the END GUARD RAILS (I) on both the upper and lower levels with the SCREWS (4) as shown. Hardware Required 12 /16 B34313519600...
Página 13
3135196 Limites Del Peso: 150Lbs\68Kgs NO REGRESAS ESTA PRODUCTO A LA TIENDA ALTO Las tiendas no tiene partes. Si falta partes o las partes esten danados llame gratis a la servicio del cliente. Con gusto mandarnos las partes. Sin alguno carga.
Página 14
PROBABILIDAD DE LA TRAMPA O DE CAÍDAS. * PARA PREVENIR LESIÓN, DHP RECOMIENDA UN COLCHÓN GEMELO DEL TAMAÑO Y UN COLCHÓN DEL MISMO TAMAÑO QUE SE UTILIZARÁN. * UTILICE SOLAMENTE Un COLCHÓN GEMELO QUE SEA 74"-75" DESEE Y DESEEN 37 1/2"-38 El 1/2" DE PAR EN PAR EN La CUCHETA SUPERIOR Y Un COLCHÓN GEMELO QUE SEA 74"-75"...
Página 15
PAGE 07 Ate los ACOPLAMIENTOS del POSTE (M) a los CARRILES del POSTE (o) con los TORNILLOS (4). Ate los CARRILES del POSTE (O) el POSTES de la PIERNA (C y B) con los TORNILLOS (4) como se muestra. Ate los CARRILES de PROTECTOR del EXTREMO (I) a los POSTES de la PIERNA (C y B) con los PERNOS (2) como se muestra.