Auerswald COMfortel D-XT20i Manual De Instrucciones página 6

English
Proper Use
The COMfortel D-XT20i is a module to add 20 freely
assignable buttons. Suitable for the following telephones:
COMfortel D-200/D-210/D-400/D-600.
Safety information
To ensure that you are able to use the COMfortel D-
XT20i safely and without faults, comply with the notes
below. Improper use may, for example, cause functional
restrictions, destruction of the device or, in a worst case
scenario, personal injury. You will find any necessary
additional warning notices about using the device in the
relevant sections.
Read these Instructions and keep them for future
reference.
Also comply with the safety Information in the Instructions
for your telephone.
Connecting Safely
Connect the device as described in these Instructions.
Take note of the technical data on the type plate and in
these Instructions.
Only use original accessories and original replacement
parts. Using the wrong power supply unit can damage or
destroy the device. Take note of the technical information
about the power supply.
Limitations on Use
Do not mount the device on a wall.
Repair
Do not open the device. Only the manufacturer is
permitted to open the device and repair it. If the display
is damaged, be careful when handling and packing the
device. There is a risk of injury.
Technical Data
COMfortel D-XT20i
Connection to
Supply
COMfortel D-200/D-210/D-400/D-600
Max. 1 module:
via USB
Operating voltage: max. 5 V, max. 0.5 A
Power consumption: max. 2.5 W, min. 1 W
2 or max. 3 modules: