Taurus AIR WAVE IONIC Instrucciones De Uso página 6

EN
English (Original instructions)
HAIR STYLER
AIR WAVE IONIC
DESCRIPTION
A Body
B Brush head
C Bristles
D Air outlet
E Function selector
F Air inlet
G Hanging loop
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance if the function selector does not
work.
• Unplug the appliance from the mains when not in use and
before undertaking any cleaning task.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Do not store the appliance if it is still hot.
• Make sure that dust, dirt or other foreign objects do not
block the fan grill on the appliance.
• Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed, and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
• Never rest the appliance on a surface while in use.
• Do not use the appliance to dry pets or animals.
• Do not use the appliance to dry textiles of any kind.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all products' packaging has been
removed.
• Please read the "Safety advice and warnings" booklet
carefully before first use.
• Some parts of the appliance have been lightly greased.
Consequently, the first time the appliance is used, light
smoke may be detected. After a short time, this smoke
will disappear.
USE
• Extend the supply cord completely before plugging it in.
• Connect the appliance to the mains.
• Turn the appliance on by using functions in the function
selector. (E).
- "COOL" ( ) for maximum speed and tepid air.
- "LOW" (I) for minimum speed and warm air.
- "HIGH" (II) for maximum speed and warm air.
HOW TO DRY THE HAIR
• Place the appliance in the desired styling position.
• For best results, we recommend selecting the "LOW"
setting.
IONIC FUNCTION
• The appliance can generate negative ions.
• Once the appliance is in operation, it automatically
activates the generation of negative ions.
• Negative ions are useful for removing static electricity and
hair frizz.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off by selecting position "0" in the
function selector. (E).
• Unplug the appliance from the mains.
• Allow to cool.
• Clean the appliance.
SAFETY THERMAL PROTECTOR
• The appliance has a safety device which protects the
appliance from overheating.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never submerge the appliance in water or any other liquid
or place it under running water.