Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Supply hose
For all countries:
•
Note:
•
Replace the main supply hose before its use-by date, if it is damaged, showing
signs of cracks, or when required to do so by national regulations. It must be
compliant with EN16436-1+A3:2020.
•
Do not pull on the hose or kink it.
•
Take care that the hose is not twisted or under any strain: the gas inlet
coupling head being located on the left side, position the gas cylinder to the
left of the appliance.
•
Keep the hose away from parts of the appliance liable to become hot.
•
Place the gas cylinder at least 1 metre away from the barbecue.
A supply hose of a length of 1.2m or 1.5m (maximum) must be used for
•
connection to the appliance.
France:
•
1. Use a hose with NF marking and a G1/2 threaded nut to screw onto the appliance, and
an M20×1.5 threaded nut onto the regulator, in compliance with Norm XP D 36-125
or Norm XP D 36-112.
2. Screw the G1/2 threaded nut of the hose onto the inlet connection of the appliance and
the M20×1.5 threaded nut (in black colour) onto the outlet connection of the regulator,
following the instructions supplied with the flexible hose.
3. Check the gas-tightness of the entire system by making the leakage test (see Leak test).
To regulator (black threaded head)
Other countries:
•
1. Use a flexible hose of a quality suitable for the use of Butane or Propane, in compliance
with current national regulations. Connect the hose onto the ringed nozzle already
installed on the appliance (see Connection to the gas cylinder), following the instructions
supplied with the flexible hose.
2. Check the gas-tightness of the entire system by making the leakage test (see Leak test).
Replacing the gas cylinder
The gas cylinder must be changed in accordance with the following instructions:
– Do not change the cylinder when the appliance is in use (control knobs must be in OFF
position (•))
– Wait until the appliance is completely cold
– Carry out replacement well away from any ignition source or heat source
– Replacement must only be carried out outdoors
Before changing the gas cylinder, ensure that its valve is completely closed.
9
EN
To barbecue
Publicidad
