Publicidad
Idiomas disponibles
Idiomas disponibles
1 LED light bulb
1 Instructions for use
Parts description
Threaded ring
1
Lamp glass
2
Lamp socket
3
Mains plug
4
Illuminant
5
Lamp base
6
Technical data
Model No.:
14135306L / 14135402L
Operating voltage: 230–240 V∼, 50 Hz
Lamp socket:
E27
Rated power:
max. 6 W
Protection class:
II /
Bulb:
LED E27, max. 4.9 W, 3-level
dimmable
Protection type:
IP20
This product contains a light source of energy effi-
ciency class "F" (in accordance with Regulation
(EU) 2019/2015).
Safety
Safety notices
Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND SMALL
CHILDREN!
Never leave children unattended with the
packaging material. The packaging material
RISK OF FATAL
Introduction / Safety
represents a danger of suffocation. Children
frequently underestimate the dangers.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, when
supervised or instructed in the safe use of the
device and they understand the associated risks.
Do not allow children to play with the device.
Cleaning and user maintenance must not be
performed by children without supervision.
RISK OF INJURY!
Do not leave the lamp or packaging material
lying unattended. Plastic film or bags, Styrofoam
etc. can become dangerous toys for children.
Avoid the risk of fatal injury
from electric shock
Luminaire with strong conducted disturbances can
cause nuisance triggering, it can be self-recovered.
Always check the mains plug for damage before
connecting the light to the mains. Never use the
light if it shows any signs of damage.
In the event of damage, repairs or other prob-
lems with the light, please contact the service
centre or an electrician.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open or insert anything into electrical
fittings or equipment (e.g. switches, fitting socket).
This will pose a risk of fatal injury from electric
shock.
Only touch the insulated area of the mains plug
when connecting to or disconnecting from the
mains!
To prevent hazards, a damaged flexible outer
lead of this light may only be exchanged by
the manufacturer, his service representative or
by an equally qualified specialist.
Before every use, verify the available mains
voltage matches the required operating voltage
of the light (see "Technical data").
Always unplug the mains plug, respectively,
from the mains prior to assembly, disassembly,
cleaning, or when the light will not be used for
extended periods.
GB/IE
13
Publicidad
