Descargar Imprimir esta página

S&P TL-39 V Manual Del Usuario página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
2.7. This product has been designed as a mobile heater. It is de-
signed as an auxiliary heat source and should be used only for
this purpose.
EN
2.8. Before connecting the heater, make sure the power supply
corresponds to the details shown on the nameplate.
2.9. Never leave home leaving the heater running.
2.10. During operation, place the heater in a safe, stable and com-
pletely fl at position.
2.11. Infl ammable objects must not be left within 3 m of the hot air
circuit (curtains...).
2.12. The front of the appliance must always be free of objects.
2.13. The heater should not be placed in a location recessed whe-
re it interferes with the free circulation of air, both in the
input and the output.
2.14. The heater must not be placed directly below a power point.
2.15. The heater power cord must be fully accessible.
2.16. ATTENTION! During operation, the air outlet grille can get
very hot.
2.17. During use of the heater, make sure that the power cord is
fully unrolled and does not touch the hottest parts of the
appliance.
2.18. If the fl exible power cable is damaged, it should only be re-
placed in one of our Repair Workshops or by qualifi ed staff in
order to avoid a dangerous situation.
2.19.
objects that prevent the air circulating freely. Obstructing the
airfl ow increases the risk of overheating.
2.20. The device should must not be positioned to operate in rooms
or stores where a hazard can arise due to the presence of gases
originating from paints, chemical products, detergents, thin-
ners, varnishes, etc., or other highly infl ammable materials.
2.21. This appliance must not be used connected to a program-
mer, timer or another device that controls heater connection
automatically.
8
This symbol means "Do not cover" this appliance with

Publicidad

loading

Este manual también es adecuado para:

Tl-39 vm