Publicidad
STEP 5
1. Insert 4 wood dowels (C) into wood dowel holes on wooden legs (12).
2. Attach wooden legs (12) to bottom board (8) by inserting wood dowels (C) into wood dowel
holes on bottom board (8).
3. Insert 4 screws (E) through holes on bottom board (8), then tighten to wooden legs (12).
1. Slide lower back board (10) into grooves on left side panel (2), right side panel (3) and shelf (5).
2. Insert 6 wood dowels (C) into wood dowel holes on bottom board (8).
3. Attach bottom board (8) to left side panel (2), right side panel (3), lower divider board (6) and lower
back board (10) by inserting wood dowels (C) into wood dowel holes on left side panel (2), right
side panel (3) and lower divider board (6). Make sure lower back board slides into groove on
bottom board (8).
4. Insert 6 screws (E) through holes on bottom board (8), then tighten to left side panel (2), right side
panel (3) and lower divider board (6).
5. Attach center leg (11) to bottom board (8) by inserting screw into hole on bottom board (8), then
rotate clockwise until secure. Do not over-tighten.
Publicidad
