4. Drain the product completely so that there is no water left in it.
If the remaining water freezes, it expands and can damage the water lines in the product.
5. Thoroughly clean the product (see section "Cleaning and maintenance").
6. Store the product in a dry and frost-free location (≥ +5 °C) without direct sunlight.
The solar collector is stored for the winter.
Technical data
Model
Maximum pressure:
Flow rate:
Water volume of collector:
Heating output
Guide values* for heating your pool:
- 1 m3 water > 1 day > max. +11.1 °C
- 14 m3 water > 1 day > max. +0.8 °C
- 14 m3 water > 5 days > max. +4.0 °C
*The results are based on 10 hours of direct sunlight per day and may vary depending on the weather.
The pool was covered with a solar tarp. (Outside temperature approx. 20 °C)
049108
1 bar at 20 °C
max. 10,000 l/h (2641 gal)
15 l
19