INSTALLATION OF YOUR OVEN
Check if the electrical installation is proper to bring the appliance in
operating condition. If electricity installation is not suitable, call an
electrician and plumber to arrange the utilities as necessary.
Manufacturer shall not be held responsible for damages caused
by operations performed by unauthorized persons.
WARNING: It is customer's responsibility to prepare the location
the product shall be placed on and also to have the electrical
installation prepared.
WARNING:
installations shall be followed during product installation.
WARNING: Check for any damage on the appliance before
installing it. Do not have the product installed if it is damaged.
Damaged products cause a risk for your safety.
Right Place for Installation and Important Warnings
Appliance feet should not stay on soft surfaces such as carpets. The
kitchen floor shall be durable to carry the unit weight and any
other kitchenware that may be used on the oven.
Appliance should be used with a clearance of minimum 400 mm over
the upper hob surfaces, and 65 mm from side surfaces inside a kitchen
furniture.
The appliance is suitable for use on both side walls, without any
support, or without being installed in a cabinet. If a hood or
aspirator will be installed above the cooker, follow the instructions of
the manufacturer for height of mounting. (Min. 650 mm)
The
rules
in
local
standards
16
about
electrical
V.1