Descargar Imprimir esta página

GE APFD06JASW Manual Del Propietario Y Instrucciones De Instalación página 4

Accondicionadores de aire para sala

Publicidad

Idiomas disponibles

Idiomas disponibles

Controls
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Timer
Timer
5
NOTE: When the machine is powered on for the first
time, the buzzer will play power-on music and then the
machine will go into standby status.
1. Power Button
Turns ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the Power
button does NOT disconnect the appliance from
power supply.
Press the Power button. The power indicator and
temperature display will illuminate, select desired
settings, after one minute the Display lights will turn off.
Press any button on the unit or remote, the display
will illuminate. Then press corresponding buttons to
change unit function.
Note: If changing functions from remote, it may
require multiple button pushes to synchronize remote
to the unit.
2. Mode Button
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
Dry – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
3. + and – Buttons
Sets the Temperature when in Cooling Mode or sets
the Time when Timer is selected.
To Set the Temperature:
Press the + or – button to select the required
temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or Dry mode.
To Set the Time:
Press the + or – button to select the required time.
4
High
Low
Fan
4
Sleep
Sleep
3
6
4. Fan Speed Button
The fan speed can be adjusted from Low to High speed
when the air conditioner is in operation.
NOTE: The fan speed cannot be adjusted when the unit
is in Dry mode.
5. Timer Button
Program a time from (1 hour to 24 hours) for the air
conditioner to turn Off or On.
6. Sleep Mode
Press the Sleep button to turn on Sleep Mode.
NOTE: You cannot turn on the Sleep mode in the Dry or
Fan Mode.
NOTE: When the inner unit chassis is full of water, the
Water Full light will turn on. A buzzer will sound for several
seconds and the compressor will stop.
Refer to the instructions on page 5 for draining the water from
the unit.
Cool
Water Full
Fan
Dry
Power
Mode
Power
2
1
49-5000527 Rev. 3

Publicidad

loading

Este manual también es adecuado para:

Apfd06