Descargar Imprimir esta página

Saniflow M092A Manual De Instalación Y Utilizacion página 10

Secador de manos

Publicidad

Idiomas disponibles

Idiomas disponibles

Spacing
- On the M092A the spacing to the water faucet must be at least 140mm.
- On the M093A the spacing to the water faucet must be at least 150mm and has to be
installed at least 350mm above the bottom of the basin.
INSTALLATION
"Air unit" installation M092A
- Drill a 33-35mm hole on the basin/deck if it is not already drilled.
- (A) Place the 'air unit' in the hole, inserting the IR sensor wire in advance.
- (B) Firmly hold the 'air unit' to ensure a correct placement, insert the rubber gasket
(1), the metal plate (2) and tighten the fixing nutv (3).

Publicidad

loading

Este manual también es adecuado para:

M093a