Kinderkraft AVEO Manual De Usuario página 14

The main parts:
Part
number
1 Frame
2 Rear wheels
3 Front wheel
4 Front fork
5 Bumper
6 Front fork fixing screws
7 Handlebars fixing screw
8 Handlebars
9 Mounting spanner
10 Bell
11 Basket
12 Basket fixing screw
Installation of the tricycle:
Slide the rear wheels (2) in the frame (1) until you hear a click (Fig. A). Attach the
mudguard (5) to the frame (1) using a screw (21). Put the front wheel (3) in the fork (4)
and tighten the front fork fixing screws (6) (Fig. B). Place the front basket (22) on the
frame (1). Attach the handlebars (8) to the frame (1) using the spanner (9) and fixing
screw (7). Fix the bell (10) to the handlebars (8). Put the pull rod (20) in the opening on
the left side of the fork (4) and fix the other end under the frame (1) at the point of
attachment of the parent handle (Fig. C). Use the fixing screw (12) to attach the basket
(11) to the frame (1) (Fig. D). Attach the backrest (15) and the guardrails (14) to the seat
(13). Then place the seat nut (16) and do not forget to install the harness (Fig. E). Place
the assembled seat facing or back to the direction of travel on the frame and tighten
the nut (23) underneath the frame (Fig. F). Insert the visor (17) in the sides of the
backrest (15). Fix the cupholder (19) to the parent handle (18) and insert it in the hole
on the frame until the latch is locked (Fig. G).
EN
Name
14
Part
number
13 Seat
14 Guardrails
15 Backrest
16 Seat cover
17 Visor
18 Parent handle
19 Cupholder
20 Pull rod
Mudguard fixing
21
screw
22 Front basket
23 Seat nut
24 Mounting spanner
Name