Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Adjusting:
Cover location − press the red buttons on both sides of the cover and set in a convenient
position. You can also use buckles on top of the cover.
Footrests − depending on the level of child development, the footrests can be folded to
enable the child to ride the tricycle. Whenever footrests are unfolded, enable the pedal
lock in the front wheel (red button).
Harness − adjust the length to hold the child firmly, but not to block movements.
Seat position − the seat can be adjusted forwards and backwards, and turned rearwards.
To do this, unscrew the nut (22) and set the appropriate position. After tightening, make
sure the seat is securely fastened.
Folding the rear wheels − slightly lift the tricycle and push the red button under the
frame, rotate the rear wheels forwards.
Older children can ride without a backrest − slide the seat cover down, remove the
backrest unlocking the levers on its sides, rotate the guardrails 90° backwards and pull
out. To ride without the backrest, the child should wear additional harness which is
located under the seat.
Adjusting the length of the parent handle − unfold and lock in a comfortable position.
Maintenance and cleaning
Seat cover, backrest, handlebars cover: Remove from the frame. Wash at max. 30°C,
gentle process. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry
clean.
Visor: Do not wash. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry
clean. Clean with a clean and damp cloth using mild soap. Allow to air dry. Do not
immerse in water.
Frame: Clean the metal frame with a soft, clean and damp cloth using mild soap.
Storage
Keep out of the reach of children.
15
Publicidad
