Rolling the hose up
RISK OF INJURY AND
DAMAGE! If the irrigation
hose is not guided, the spring
tension of the automated
ravelling system can cause it to
spin around and lead to injury
and property damage .
Always guide the irrigation hose
by hand . Ensure that no other
people are nearby when re-
ravelling .
Never reach inside of the
housing .
Close the spray nozzle
*
turning it into counter-clockwise
direction (see Fig . I) .
Turn off the tap .
*
Open the spray nozzle
*
release the water pressure . To
do this, turn it clockwise . Close
the spray nozzle
turning it into counter-clockwise
direction .
30 GB/IE
by
5 ]
[
to
5 ]
[
again by
5 ]
[
Hold the irrigation hose
*
and pull it briefly to activate the
return block . Guide the irrigation
hose
with your hand while
12 ]
[
it automatically rolls back up to
the endstopper
reel
(see Fig . J) .
11 ]
[
Connecting other
water consumers
Make sure the tap and the spray
*
nozzle
are close .
[
5 ]
Remove the spray nozzle
*
from the hose connector with
water stop
[
4 ]
The water stop integrated in the
*
hose connector prevents water
flowing out .
Now connect another water
*
consumer to the hose connector
with water stop
that it clicks into place .
[
12 ]
in the hose
16 ]
[
5 ]
[
(see Fig . K) .
. Make sure
4 ]
[