Mc Haus Artic 460 Manual Del Usuario página 97

MAIN MODALITIES
Mode
1. Press the "Timer" button to set the automatic shutdown time while the unit is running.
2. Press the "Timer" button to set the auto power on time while the unit is ready.
3. The time can be set within a range of 1h to 24h.
4. Press the or
Mode
1. The operation
2. Press the button
fan will automatically rotate at low speed. The set temperature will increase by 1ºC after one hour, and
will increase by 2ºC after two hours. After six hours, the unit will stop operating.
Mode
1. When this mode is active, the wings will automatically swing up and down.
2. Press the button a second time to turn off this mode.
WARNING:
The main control board has memory function, when the unit is ready to run, but in stop state,
the main control board can memorize the initialization of working mode. When the device is
active, it will work with the same working mode as the last time, without resetting the working
mode again. This condition is not available when the unit is in mode auto .
button to increase or decrease by 1 hour by pressing 1 time.
ais effective when the unit is in mode
in mode , then the unit will operate in standby mode and the up centrifugal
.
97