BOJ PC-1100-5 Manual De Uso página 11

There is air leaking from the
float valve.
The float valve will not rise
while the Induction Pressure
Cooker is operating.
Water leaks from the back of
the appliance.
It seems like too much air is
escaping from the pressure-
limit valve.
The screen is reading 'E0
error'.
The screen is reading 'E1
error'.
The screen is reading 'E2
error'.
The screen is reading 'E3
error'.
The screen is reading 'E4
error'.
The screen is reading 'E5
error'.
The screen is reading 'E6
error'.
The screen is reading 'E7
error'.
There may be food remains
on the float valve.
The float valve seal ring is
broken.
If the float valve is not rising,
there may not be enough food
or water.
There may be an air leak from
the cover or the pressure-limit
valve.
The water collection container
is full or not properly
positioned.
The pressure-limit valve may
be improperly placed or there
may be something on the
air-out rod.
You may be operating above
the pressure level limit.
The uncover knob is not
switched to the closed
position.
This means the circuit at the
bottom sensor is open.
This means the circuit at
the bottom sensor has
malfunctioned.
This means that the inner
temperature of the Induction
Pressure Cooker is too high.
This means the circuit at the
top sensor is open and not
functioning properly.
A top sensor circuit has
shorted and will need repair.
The appliance is detecting low
temperature and air pressure,
and it will need repair.
This means the inner
temperature is too high and
the float valve cannot rise.
This requires repair.
- 11 -
The float valve seal will need
to be cleaned.
The float valve seal ring will
need to be replaced, contact
Customer Support and
Warranty.
Ingredients added to the bowl
must sit within the 'No.2'
water line and 'Max' water
line.
Contact Customer Support
and Warranty.
Unplug the appliance
immediately. Wipe the
appliance with a dry cloth,
empty the water collection
container and position it
properly.
The pressure-limit valve and
air-out rod will need to be
cleaned and reinstalled.
Contact Customer Support
and Warranty.
Switch uncover knob to the
closed position.
Contact Customer Support
and Warranty.
Contact Customer Support
and Warranty.
Stop using the appliance until
the temperature returns to
normal.
Contact Customer Support
and Warranty.
Contact Customer Support
and Warranty.
Contact Customer Support
and Warranty.
Contact Customer Support
and Warranty.
English