Publicidad
Idiomas disponibles
Idiomas disponibles
. Before operation
Information on changing the door hinge can be found in the user manu-
al.
Unpack the appliance and remove the adhesive tape.
Use a mild cleaning agent to remove any adhesive residues.
Dispose of the expanded polystyrene padding separately from the other pack-
aging.
Rinse the inside of the appliance and the fittings with lukewarm water and mild
cleaning agent and allow to dry (see section 'Cleaning and defrosting' in the user
manual).
.. Setting up the appliance
Set up the appliance in an appropriate location (see also section '3.3.1. Location'
on page 88).
Ensure that the appliance is level; compensate for any unevenness in the floor by
screwing in the adjustable feet.
Level the fridge freezer with a spirit level.
To fully open the door, the room dimensions stated below must be available.
ca. 5cm
ca. 87 cm
.. Removing and reinserting the freezer drawers
To remove a freezer drawer, open the door completely.
Pull out the freezer drawer with both hands and remove the freezer drawer from
the freezer compartment at a slight angle.
To reinsert a freezer drawer, slide the freezer drawer into the appliance at a slight
angle.
94
ca. 5 cm
5 cm
5 cm
ca. 96 cm
ca. 103 cm
Publicidad
